GTA 6 Landed, and Every Loose HDMI Port in Los Angeles Showed Up at OncePS5 HDMI Port Replacement — Downtown Los Angeles
Thirty phone calls today. I counted because by the afternoon I'd stopped being able to tell them apart, and nearly every one of them asked the same thing: can you do it today? A new game drops and suddenly every console that's been limping along for months needs to work tonight. I had to say no to most of them, and I know exactly where those calls went next. I'd still rather lose the job than rush this one.
Wobbles under a fingertip, signal cuts in and out
Old port off, pads cleaned, new one soldered on
And that's with nothing unexpected inside
The job, on one card
What came in, what it costs, and what's worth adding while the console is already open.
| Model | PlayStation 5 |
|---|---|
| Problem | HDMI port physically loose — it moves when you touch it. Picture drops out or won't come up at all depending on how the cable sits |
| Service | HDMI port removed, pads cleaned and inspected, new port soldered on, joints protected and UV cured, console reassembled and tested |
| Price | HDMI port replacement $130 · deep cleaning +$30 while it's open ($120 on its own) · liquid metal +$30 while it's open · both extras together $60 |
| Bench time | 2 hours minimum · longer on a day like today |
| Same day? | Often, but not during a week like this one. We'll tell you honestly when you call |
| Difficulty | Not complicated, but not for a beginner4 / 5 |
| Tech's note | GTA 6 came out and the phone hasn't stopped. Thirty calls today, and I'd
guess twenty-five of them opened with "can I get it back tonight?" I understand the question completely — nobody
waits years for a game and then wants to hear about my queue. But a PS5 HDMI port is two hours minimum, and those
two hours are not padding. It's a soldering job on a dense board with a hot air gun in your hand, and the
difference between someone who has done hundreds and someone who has watched a video is a board that still works
afterward. So I said no a lot today, and I could hear people going down their list to the next shop. That's fine. What I can't do is hurry a heat gun. Honestly I nearly fell over by closing — but every console that went out today went out right. |
Why two hours, and what else to do while it's open
The port is the reason it came in. It usually isn't the only thing worth doing.
This is soldering, not swapping
The port doesn't unplug. It comes off the board with hot air and goes back on the same way, next to components that don't enjoy the experience. Two hours covers getting in, doing it properly, protecting the joints and testing before it closes. Hands that have done it hundreds of times are the actual part you're paying for.
Dirty vents mean cleaning isn't optional
If the vents are packed, a deep clean has to happen — there's no point sealing a console back up to overheat. On its own it's $120; added while we already have the console open it's $30. The only cheap time to do it is the time it's already apart.
Around two years, the liquid metal is done
The liquid metal between the chip and the heatsink loses its performance at roughly the two-year mark whether you play daily or not. If the console is around that age, refreshing it while it's open costs $30. Skip it and there's a real chance it comes back for overheating, which means paying to open the same console twice.
Off, inspected, on, cured
The numbered stages exactly as they happened on the bench today.

Getting to the board
A PS5 does not come apart quickly. Panels, shields, the fan, the heatsink, and a lot of screws before the board is even accessible — and every one of them goes back in its own hole. This is also the moment you find out whether the vents are packed with dust and whether the thermal side needs attention, which is why we quote the extras after the console is open rather than over the phone.



The port comes off, and then you look
Lifting the old port is the easy half. The half that matters is what's underneath. Every pad gets cleaned and gone over before anything new touches the board — the circled ones in the middle photo are the pads that got the closest look. A pad that's damaged or lifted will not announce itself later; it will just hand you a repair that works for a week. Checking at this point is far cheaper than finding out after the console is back together.


On, then locked down
The new port goes on and every pin is checked before the board goes anywhere. Then the joints get a protective coat cured under UV — it takes a couple of minutes and it means the area is sealed against moisture and a lot sturdier against the pushing and pulling that killed the first port. Skipping this step is how a repair becomes a repeat visit.
Picture back, and solid in the socket
Reassembled, connected to the bench monitor, and run before anybody gets called.
No wobble, no dropout
Back together and running on the shop monitor. The cable seats with a proper click, the port doesn't move when you push on it, and the picture holds while the cable gets wiggled on purpose — which is the test that actually matters, because a port that only works when nobody touches it is the fault we started with. Two hours, start to finish, on a day where two hours was hard to find.

What LA gamers are asking this week
Straight answers, as always.
How much is a PS5 HDMI port repair in Los Angeles?
$130 for the port replacement. If the console needs a deep clean it's $30 more while it's already open, against $120 on its own. Refreshing the liquid metal is also $30 while it's open, and both extras together are $60. We quote them after we've looked inside, not over the phone, because we don't know what's in there until it's apart.
Can I get it back same day?
Usually yes, but not this week — a game launch empties every living room into every repair shop in the city. The honest version is that the work itself is two hours and the queue is the rest. Call 424-270-4369 and we'll tell you what day we can actually do it rather than what you'd like to hear.
Should I add the cleaning and the liquid metal?
If the vents are dirty, the cleaning isn't really optional. The liquid metal is worth it once a console is around two years old, because its performance falls off by then regardless of use, and doing it later means paying to open the same console a second time. Here's what a liquid metal service looks like and what PS5 overheating repair costs.
My PS5 shows no signal. Is it always the port?
Not always, but it's the first thing we check and it's the most common answer by a wide margin — especially if the port moves, if a pin looks bent, or if the picture depends on how the cable is sitting. It can also be the HDMI chip on the board, which is a different repair. The diagnosis is free either way.
Can I replace the port myself?
Only if you already own a hot air station and have used it on boards like this one. The port is soldered through a dense area, and the common beginner outcome is lifted pads, which turns a $130 job into a much bigger one. If you've already tried and something came off, bring it anyway — we see that regularly and it's usually still fixable.
More PS5 repairs from our Downtown LA bench
Same bench, same philosophy, different consoles.
PS5 with no signal in Los Angeles?
Free diagnosis, HDMI port replacement at $130, deep cleaning and liquid metal $30 each while the console is open, and a straight answer about when we can actually have it ready. FIXSTORY DTLA, 810 S Flower St, Suite B, Los Angeles. Booking ahead is best, especially this week — call 424-270-4369 and ask us anything.



