Master the Art of
iPad Repair Masterclass
Intensive 5-Day Course. From safe opening techniques to advanced microsoldering, frame restoration, and board-level diagnostics. Build the skills that generate immediate revenue.
Almost Every Repair, Covered
Five days in, you can take on nearly any tablet that comes through your door.
Nearly every tablet repair
Screens, batteries, charging ports, cameras, bent frames, and board-level basics. The jobs that actually walk in, all covered.
Board work is not a dead end
With a thermal camera and a DC supply you can read a board, find a short, and stop turning away every "no power" device.
Know what to outsource
You learn where your limit is and how to hand off advanced board work instead of destroying a customer's device.
Higher ticket than phones
Far fewer shops touch tablets. Less competition on the same street, and a bigger invoice per repair.
Vendor access from day one
Tablet parts are harder to source than phone parts. You leave with the suppliers we actually buy from.
Support after you leave
When you hit a repair you have not seen before, you have someone to ask.
What You Will Master
We strip away theory and focus on high-margin tablet repairs.
Safe Opening Tech
Learn non-destructive opening techniques using heat and pry tools to preserve waterproofing seals.
Port Microsoldering
Focus on USB-C port replacements. Master flux application, temperature control, and pin alignment.
Frame Restoration
Learn to reshape bent aluminum chassis. It's not just about the board; the device must look premium.
Intensive Curriculum
info * Note: This curriculum serves as a core framework. The actual training schedule is tailored flexibly to match each student's current skill level and specific goals.
Day 1: Device Anatomy & Safe Opening
Understanding internal architecture. Learn non-destructive opening with heat and pry tools.
- check_circle Heat management
- check_circle Adhesive removal
- check_circle Cable routing
- check_circle Preventing damage
Day 2: Advanced Soldering & Ports
Microsoldering fundamentals. Focus on tablet USB-C and Lightning port replacements.
- check_circle Flux and temp control
- check_circle Port transplanting
- check_circle Pad repair
- check_circle Pin alignment
Day 3: Frame & Structural Repair
Straightening bent aluminum chassis. Ensuring perfect fit post-reassembly.
- check_circle Bent frame correction
- check_circle Bezel alignment
- check_circle Re-sealing techniques
- check_circle Cosmetic finishing
Day 4: Live Diagnostics & Business
Complex troubleshooting, parts sourcing, pricing strategy, and customer workflows.
- check_circle Complex diagnostics
- check_circle Vendor channels
- check_circle Pricing strategies
- check_circle Certificate awarded
Day 5: Board Repair Fundamentals
Introduction to board-level work. Use a thermal camera to read the board, locate short circuits, and learn the basics of board repair.
- check_circle Thermal camera board diagnosis
- check_circle Locating short circuits
- check_circle Injecting voltage with a DC power supply
- check_circle Board repair fundamentals
Course Information
Limited slots to ensure personalized instruction.
Masterclass Details
Details for the next session.
- done 5-day intensive (Mon-Fri)
- done All tools provided